It will work. I'm not sure why everyone is getting these. I've looked at the code in there and the only thing that stands out is that all of those lines contain
"http://surbl-org-permanent-test-point.com/foo/bar"
So there may lie the problem?
--Chris
-----Original Message----- From: spam@mail.designmedia.com [mailto:spam@mail.designmedia.com] Sent: Friday, July 16, 2004 1:14 PM To: spamassassin-users@incubator.apache.org Subject: SURBL Help?
Hi. Did anyone run into a open_redirect problem when installing the SURBL plugin? (See error log below)
And if I try to install it anyway by copying over the .cf file, SA spits out this error when testing:
debug: uri tests: Done uriRE Failed to compile URI SpamAssassin tests, skipping: (syntax error at /etc/mail/spamassassin/spamcop_uri.cf, rule SPAMCOP_URI_RBL, line 1, near "eval:" syntax error at /etc/mail/spamassassin/bigevil.cf, rule BigEvilList_23, line 1038, near "; }"
I'm running Fedora C1 with SA 2.63 and all the prerequisite perl modules.
Thanks.
---snip--- (home/spam) mail 2%> perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Mail::SpamAssassin::SpamCopURI (home/spam) mail 3%> make cp lib/Mail/SpamAssassin/Conf.pm blib/lib/Mail/SpamAssassin/Conf.pm cp lib/Mail/SpamAssassin/PerMsgStatus.pm blib/lib/Mail/SpamAssassin/PerMsgStatus.pm cp lib/Mail/SpamAssassin/SpamCopURI.pm blib/lib/Mail/SpamAssassin/SpamCopURI.pm Manifying blib/man3/Mail::SpamAssassin::PerMsgStatus.3pm Manifying blib/man3/Mail::SpamAssassin::Conf.3pm Manifying blib/man3/Mail::SpamAssassin::SpamCopURI.3pm (home/spam) mail 4%> make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/blacklist........ok t/dnsrbl...........ok t/extract_urls.....ok t/mailto...........ok t/open_redirect....NOK 1# Failed test (t/open_redirect.t at line 37) t/open_redirect....NOK 2# Failed test (t/open_redirect.t at line 44) t/open_redirect....NOK 3# Failed test (t/open_redirect.t at line 52) t/open_redirect....ok 4/5# Looks like you failed 3 tests of 5. t/open_redirect....dubious Test returned status 3 (wstat 768, 0x300) Scalar found where operator expected at (eval 152) line 1, near "'int' $__val" (Missing operator before $__val?) DIED. FAILED tests 1-3 Failed 3/5 tests, 40.00% okay t/spamcopuri.......ok t/whitelist........ok Failed Test Stat Wstat Total Fail Failed List of Failed
t/open_redirect.t 3 768 5 3 60.00% 1-3 Failed 1/7 test scripts, 85.71% okay. 3/57 subtests failed, 94.74% okay. make: *** [test_dynamic] Error 255 (home/spam) mail 5%>
Hi.
I copied over the spamcop_uri.cf to /etc/mail/spamassassin and restarted spamd but when I try to test it by feeding it a test email via:
spamassassin -t -D < /opt/spamassassin/Mail-SpamAssassin-2.63/sample-spam.txt
(which contains a "surbl-org-permanent-test-point.com" URL)
I get this error in the output:
---snip--- debug: running raw-body-text per-line regexp tests; score so far=0 debug: running uri tests; score so far=0 debug: uri tests: Done uriRE Failed to compile URI SpamAssassin tests, skipping: (syntax error at /etc/mail/spamassassin/spamcop_uri.cf, rule SPAMCOP_URI_RBL, line 1, near "eval:" syntax error at /etc/mail/spamassassin/bigevil.cf, rule BigEvilList_1614, line 10990, near "; }" ) debug: running full-text regexp tests; score so far=0 ---snip---
Thanks.
--Henry Kwan
On Fri, 16 Jul 2004, Chris Santerre wrote:
It will work. I'm not sure why everyone is getting these. I've looked at the code in there and the only thing that stands out is that all of those lines contain
"http://surbl-org-permanent-test-point.com/foo/bar"
So there may lie the problem?
--Chris
-----Original Message----- From: spam@mail.designmedia.com [mailto:spam@mail.designmedia.com] Sent: Friday, July 16, 2004 1:14 PM To: spamassassin-users@incubator.apache.org Subject: SURBL Help?
Hi. Did anyone run into a open_redirect problem when installing the SURBL plugin? (See error log below)
And if I try to install it anyway by copying over the .cf file, SA spits out this error when testing:
debug: uri tests: Done uriRE Failed to compile URI SpamAssassin tests, skipping: (syntax error at /etc/mail/spamassassin/spamcop_uri.cf, rule SPAMCOP_URI_RBL, line 1, near "eval:" syntax error at /etc/mail/spamassassin/bigevil.cf, rule BigEvilList_23, line 1038, near "; }"
I'm running Fedora C1 with SA 2.63 and all the prerequisite perl modules.
Thanks.
---snip--- (home/spam) mail 2%> perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Mail::SpamAssassin::SpamCopURI (home/spam) mail 3%> make cp lib/Mail/SpamAssassin/Conf.pm blib/lib/Mail/SpamAssassin/Conf.pm cp lib/Mail/SpamAssassin/PerMsgStatus.pm blib/lib/Mail/SpamAssassin/PerMsgStatus.pm cp lib/Mail/SpamAssassin/SpamCopURI.pm blib/lib/Mail/SpamAssassin/SpamCopURI.pm Manifying blib/man3/Mail::SpamAssassin::PerMsgStatus.3pm Manifying blib/man3/Mail::SpamAssassin::Conf.3pm Manifying blib/man3/Mail::SpamAssassin::SpamCopURI.3pm (home/spam) mail 4%> make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/blacklist........ok t/dnsrbl...........ok t/extract_urls.....ok t/mailto...........ok t/open_redirect....NOK 1# Failed test (t/open_redirect.t at line 37) t/open_redirect....NOK 2# Failed test (t/open_redirect.t at line 44) t/open_redirect....NOK 3# Failed test (t/open_redirect.t at line 52) t/open_redirect....ok 4/5# Looks like you failed 3 tests of 5. t/open_redirect....dubious Test returned status 3 (wstat 768, 0x300) Scalar found where operator expected at (eval 152) line 1, near "'int' $__val" (Missing operator before $__val?) DIED. FAILED tests 1-3 Failed 3/5 tests, 40.00% okay t/spamcopuri.......ok t/whitelist........ok Failed Test Stat Wstat Total Fail Failed List of Failed
t/open_redirect.t 3 768 5 3 60.00% 1-3 Failed 1/7 test scripts, 85.71% okay. 3/57 subtests failed, 94.74% okay. make: *** [test_dynamic] Error 255 (home/spam) mail 5%>
Oops. Maybe I misread your email. Are you saying that I shouldn't be "http://surbl-org-permanent-test-point.com/foo/bar" as a test URL? If so, which one should I use?
Thanks.
--Henry Kwan
On Fri, 16 Jul 2004, Chris Santerre wrote:
It will work. I'm not sure why everyone is getting these. I've looked at the code in there and the only thing that stands out is that all of those lines contain
"http://surbl-org-permanent-test-point.com/foo/bar"
So there may lie the problem?
--Chris
-----Original Message----- From: spam@mail.designmedia.com [mailto:spam@mail.designmedia.com] Sent: Friday, July 16, 2004 1:14 PM To: spamassassin-users@incubator.apache.org Subject: SURBL Help?
Hi. Did anyone run into a open_redirect problem when installing the SURBL plugin? (See error log below)
And if I try to install it anyway by copying over the .cf file, SA spits out this error when testing:
debug: uri tests: Done uriRE Failed to compile URI SpamAssassin tests, skipping: (syntax error at /etc/mail/spamassassin/spamcop_uri.cf, rule SPAMCOP_URI_RBL, line 1, near "eval:" syntax error at /etc/mail/spamassassin/bigevil.cf, rule BigEvilList_23, line 1038, near "; }"
I'm running Fedora C1 with SA 2.63 and all the prerequisite perl modules.
Thanks.
---snip--- (home/spam) mail 2%> perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Mail::SpamAssassin::SpamCopURI (home/spam) mail 3%> make cp lib/Mail/SpamAssassin/Conf.pm blib/lib/Mail/SpamAssassin/Conf.pm cp lib/Mail/SpamAssassin/PerMsgStatus.pm blib/lib/Mail/SpamAssassin/PerMsgStatus.pm cp lib/Mail/SpamAssassin/SpamCopURI.pm blib/lib/Mail/SpamAssassin/SpamCopURI.pm Manifying blib/man3/Mail::SpamAssassin::PerMsgStatus.3pm Manifying blib/man3/Mail::SpamAssassin::Conf.3pm Manifying blib/man3/Mail::SpamAssassin::SpamCopURI.3pm (home/spam) mail 4%> make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/blacklist........ok t/dnsrbl...........ok t/extract_urls.....ok t/mailto...........ok t/open_redirect....NOK 1# Failed test (t/open_redirect.t at line 37) t/open_redirect....NOK 2# Failed test (t/open_redirect.t at line 44) t/open_redirect....NOK 3# Failed test (t/open_redirect.t at line 52) t/open_redirect....ok 4/5# Looks like you failed 3 tests of 5. t/open_redirect....dubious Test returned status 3 (wstat 768, 0x300) Scalar found where operator expected at (eval 152) line 1, near "'int' $__val" (Missing operator before $__val?) DIED. FAILED tests 1-3 Failed 3/5 tests, 40.00% okay t/spamcopuri.......ok t/whitelist........ok Failed Test Stat Wstat Total Fail Failed List of Failed
t/open_redirect.t 3 768 5 3 60.00% 1-3 Failed 1/7 test scripts, 85.71% okay. 3/57 subtests failed, 94.74% okay. make: *** [test_dynamic] Error 255 (home/spam) mail 5%>
-
Chris Santerre -
spam＠mail.designmedia.com